CPMD-11E
The Corode CPMD pumps offer a safe way of pumping chemical and corrosive liquids through a closed pump housing without shaft seal. The pump housing is constructed entirely from PP of PVDF. As a result the medium being pumped does not come into contact with metal, meaning that the pump head is resistant to corrosion.
The CPMD-11E is standard fitted with a 3Ph 230-400V motor. In addition to the standard 3Ph motor the CPMD-11E is also available with a 1Ph 230V motor including on-off switch on the motor.
Models
The CPMD-11E gives you the choice between a PP or PVDF pump head. The shaft and the bearings are ceramic.
- - PP pump head: maxium liquid temperature is 0-75ºC.
- - PVDF pump head: maxium liquid temperature is 0-90ºC.
Technical Specs
Material available:
O-ring:
Max. flow:
Max. head:
Max. temperature:
Max. viscosity:
Motor 1:
Motor 2:
PP of PVDF
EPDM of Viton
11m3/h
11.8mtr
PP 75ºC; PVDF 90ºC
200 cSt
0.55kW, 400V, 2.3/1.3Amp, 3Ph, 50Hz, IP55
0.55kW, 230V, 5Amp, 1Ph, 50Hz, IP55
Request a quote
Feel free to inquire about any of our services or, if you wish to receive a quote, please use the contact form.
Technical Drawings
Related products
Specific modifications
If you would like specific modifications with regards the motors, connections or otherwise, please contact our sales team. We will make sure you will receive a suitable offer.